Compare Prices

1/8 Male Elbow

Elbow Male 1/8 - Tailonz Pneumatic Male Elbow - 1/4
Tailonz Pneumatic Male Elbow - 1/4" Tube OD x 1/8" NPT Thread,PL-1/4-N1 Push to Connect Tube Fitting (Pack of 10)

【GOOD SEALING】All thread are Teflon Coated. Please use straight cut tubing before inserting into the fitting.【IT IS EASY TO USE】 It is easy to insert or pull the trachea by hand without the aid of a tool. 【MATTERS NEED ATTENTION】 1.Please do not use it for purposes other than fluids.  2.Please do not exceed the maximum use pressure when using. 3.After the pipe is connected and installed, pull the pipe to make sure that the pipe cannot pull out the joint. 4.Do not use outside the service temperature range to prevent deformation of the sealing material and easy leakage. 5.Do not use it in places where metal powder or sand dust is mixed, such as adhesion of other materials may cause poor work or leakage. 6.When inserting the pipe, it must be inserted into the bottom of the joint. Failure to insert the pipe into the bottom may lead to air leakage.7.Make sure that the cutting surface of the pipe is vertical, there is no scar on the outer circumference of the pipe and the pipe is not oval.【1/4 nylon tube】ASIN:B07P56RNXK【PL1/4-N2】1/4 od x 1/4 npt ASIN:B07P7BFZ6T

  • Brand: Tailonz
  • ASIN: B07PHZGK3F
  • Part No: PL-1/4-N1
Elbow 1/8 Male - EDGE INDUSTRIAL Forged Brass 90 Degree Street Elbow 1/8
EDGE INDUSTRIAL Forged Brass 90 Degree Street Elbow 1/8" Male NPT X 1/8" Female NPT Fuel/AIR/ Water/Oil/ Gas WOG

1/8" Male NPT x 1/8" Female NPT 90° Forged Brass Elbow Pipe Fitting. Used for a variety of applications, not limited to grease, fuels, refrigeration, water, oil gas, and hydraulic systems. Working pressure of 1200 PSI. Temperature range of -65°F to 250°F (-53°C to 121°C). Meets the standards of ASA, ASME and SAE. Not deemed lead free. Not for use with potable water. Please Note: NPT Thread size is NOT determined by its outside thread diameter in inches. Please review our attached NPT sizing chart to cross reference NPT thread size to linear inches

  • Brand: EDGE INDUSTRIAL
  • ASIN: B07D2422X6
  • UPC: 691023895676
  • Part No: E.I. NPT 165
1/8 Elbow Male - Brennan 5502-02-02-SS Stainless Steel Pipe Fitting, 90 Degree Elbow, 1/8
Brennan 5502-02-02-SS Stainless Steel Pipe Fitting, 90 Degree Elbow, 1/8" NPT Male X NPT Female

This Brennan 90-degree elbow is a stainless steel 316 pipe fitting with male National Pipe Taper (NPT) threads on one end and female NPT threads on the other end to connect and change the flow direction between two different types of pipe. The elbow has NPT threads for creating tighter seals than straight threads and is made from stainless steel 316, which is more corrosion resistant than stainless steel 304. This fitting meets SAE J514 specifications for quality assurance. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Brennan Industries manufactures critical flow components. The company, founded in 1953 and headquartered in Solon, OH, meets International Organization for Standardization (ISO) 9001:2008 standards and its fittings meet Society of Automotive Engineers (SAE) specifications.

  • Brand: brennan
  • ASIN: B004Y18ER2
  • Part No: 5502-02-02-SS
1/8 Elbow Male - Aluminum 90 Degree Elbow One Piece Full Flow 4AN to 1/8 NPT Forged Male Flare Coupling Pipe Union Fittings Black
Aluminum 90 Degree Elbow One Piece Full Flow 4AN to 1/8 NPT Forged Male Flare Coupling Pipe Union Fittings Black

  • Color: 90 deg one piece AN to NPT elbow black
  • Brand: AC PERFORMANCE
  • ASIN: B07M8FW6W2
  • Part No: X822-9004-BK
Elbow Male 1/8 - PneumaticPlus PN15 Series Push to Connect Tube Fitting, Male Elbow (1/4
PneumaticPlus PN15 Series Push to Connect Tube Fitting, Male Elbow (1/4" Tube X 1/8" NPT) - Pack of 5

PN15 series are ready to use as all thread are Teflon Coated. Please use straight cut tubing before inserting into the fitting.

  • Brand: PneumaticPlus
  • ASIN: B072YWW13K
  • Part No: PN15 1/4 1/8
Male 1/8 Elbow - Beduan 10 Pcs BPL Push to Connect Air Fittings Male Elbow 8mm Tube OD x 1/8
Beduan 10 Pcs BPL Push to Connect Air Fittings Male Elbow 8mm Tube OD x 1/8" NPT Thread

Beduan Pneumatic Fittings are a compact one piece push-to-connect fitting.All items in the Beduan Pneumatic composite range are silicone free.The Stainless steel gripping ring ensures excellent tube retention while the D sealwithin the fitting provides a positive seal on the O.D. of the tube,in both static and dynamic positions, due to an optimized design of the fitting cavity.Beduan Pneumatic composite should not be used for live swivel applicationsBody and collar are made of Nylon 6.6, gripping ring is stainless steel, and D seal and O-rings are Nitrile.

  • Brand: Beduan
  • ASIN: B07RP586WG
  • UPC: 053742174829
  • Part No: 1kl-01001-BPL
Male 1/8 Elbow - PL-04-02 (5 Pack) 1/4
PL-04-02 (5 Pack) 1/4" Tube OD x 1/8" NPT Thread Male Elbow Push to Connect Pneumatic Tube Fitting Composite

- 1/4 Tube X 1/8 Male Pipe -Working Pressure: 0-150 P.S.I -Working Temperature: 32-140F -Minimum Order Quantity: 5 WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

  • Brand: Dax Pneumatics
  • ASIN: B07M742JDV
  • UPC: 696303054293
1/8 Elbow Male - 10 Pack Push to Connect Air Fittings 90 Degree Pneumatic Tube Fitting Male Elbow 1/4
10 Pack Push to Connect Air Fittings 90 Degree Pneumatic Tube Fitting Male Elbow 1/4" Tube OD x 1/8" NPT Thread

1. You can easily change the tubing connector direction. Narrow space is also suitable with the push 2. Push Fittings are mainly used for quick connector piping, which can achieve line connected or disconnected 3. Widely used in industries automatic production equipment like machinery, electronics, automobile, packaging and medical Package includes: 10 X Quick Connect Fitting Connectors

  • Color: 1/4"x 1/8"
  • Brand: Yarr Store
  • ASIN: B07H7X4QFM
  • UPC: 675663792113
  • Part No: YE091101
 - 1/8
1/8" Low Lead Brass Male Elbow, 700069-0202

1/8 Male Elbow

  • Color: Multicolor
 - Urbanest Hinged Elbow Connector for Corner Rod, Black, 1 1/8
Urbanest Hinged Elbow Connector for Corner Rod, Black, 1 1/8"

1/8 Male Elbow

  • Color: Black
  • Size: 1 1/8"1/8\"
  • Rating: 5.0
 - 1/8
1/8" x 1/4" Low Lead Brass Male Elbow, 700069-0402

1/8 Male Elbow

  • Color: Multicolor
 - 1/4
1/4" x 1/8" 90 Brass Flare x Male Elbow ,PartNo F40082 JonesStephens

1/8 Male Elbow

 - Interstate Pneumatics FST22EA 1/8 Inch NPT 45 Degree Street Pipe Elbow brass thread male female air - FST22EA
Interstate Pneumatics FST22EA 1/8 Inch NPT 45 Degree Street Pipe Elbow brass thread male female air - FST22EA

1/8 Male Elbow

  • Model: FST22EA
 - 1/8
1/8" PT Male Thread Elbow Type Connector Quick Fitting Coupler for 12mm OD Tube

1/8 Male Elbow

  • Color: othersOther
  • Size: others
 - 1/8
1/8" PT Male Thread Elbow Type Connector Quick Fitting Coupler for 8mm OD Tube

1/8 Male Elbow

  • Color: othersOther
  • Size: others
 - 1/8
1/8" PT Male Thread Elbow Type Connector Quick Fitting Coupler for 8mm OD Tube

1/8 Male Elbow

  • Color: othersOther
  • Size: others
 - 1/8
1/8" Street 90 Degree Elbow Male Female NPT Air Fuel Water BRASS

1/8 Male Elbow

  • Category: Other Fittings & Adapters
 - Push Loc 1/8 Npt X 1/4
Push Loc 1/8 Npt X 1/4" PT Male Thread 90 Degree Elbow Pipe Quick Fittings 10 Pc

1/8 Male Elbow

  • Category: Other Fittings & Adapters
 - 2 PC - 1/8 Inch NPT 45 Degree Street Pipe Elbow brass thread male female
2 PC - 1/8 Inch NPT 45 Degree Street Pipe Elbow brass thread male female

1/8 Male Elbow

  • Category: Other Fittings & Adapters
 - 1/8 Inch NPT 45 Degree Street Pipe Elbow brass thread male female air - FST22EA
1/8 Inch NPT 45 Degree Street Pipe Elbow brass thread male female air - FST22EA

1/8 Male Elbow

  • Category: Other Fittings & Adapters
 - 1/8
1/8" NPT Male x 3/8" Hose-Barb Black Hard Nylon Elbow Adapter Fittings (2)

1/8 Male Elbow

  • Category: Other Fittings & Adapters
 -  5/16
5/16" HOSE BARB ELBOW X 1/8 MALE NPT Brass Pipe Fitting Thread Gas Fuel water

1/8 Male Elbow

  • Category: Other Fittings & Adapters
 - 5 PC - 1/8 Inch NPT 45 Degree Street Pipe Elbow brass thread male female
5 PC - 1/8 Inch NPT 45 Degree Street Pipe Elbow brass thread male female

1/8 Male Elbow

  • Category: Other Fittings & Adapters
 - 3pcs Brass Barbed Male Elbow Fittings Male Pipe Size 1/8
3pcs Brass Barbed Male Elbow Fittings Male Pipe Size 1/8" NPT Hose Barb ID 3/8"

1/8 Male Elbow

  • Category: Other Fittings & Adapters

Solidworks Basic tutorial #29- QUICK DESIGN 1/2" BSP MALE ELBOW IN 10 MINUTES

1/8 Male Elbow

Solidworks basic tutorial step by step

Tags: Solidworks basic tutorial,solidworks,solidworks...

1/8 Male Elbow L2396 Search Results

Want more 1/8 Male Elbow similar ideas? Try to explore these searches: Silk Womens Skirt, 1 Performance Full Zipper, and Unified Ignition.

AllinShopy.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.