Compare Prices

Conductivity Calibration Solution

Calibration Solution Conductivity - Conductivity Calibration Standard 3-Pack 500 ml Each 84 US, 1,413 uS and 12,880 uS
Conductivity Calibration Standard 3-Pack 500 ml Each 84 US, 1,413 uS and 12,880 uS

Don't assume that your conductivity meter is working correctly. Probes can get dirty, worn and damaged. Give yourself that feeling of confidence that comes from doing things the right way. We suggest you use 2 or more calibration standards to cover a range that you normally work within to verify the linearity of the instrument. A different correction factor may be required for high EC values compared to low EC values. If your meter is essentially linear over the entire calibration range you can feel confident in your measurement results. TDS is an old terminology still used today in some water testing applications. It attempts to correlate Total Dissolved Solids (TDS) with conductivity. But because the conductivity depends upon exactly which "solids" are dissolved it can vary widely with different situations. Biopharm conductivity standards are calibrated using NIST traceable potassium chloride conductivity reference standards and are shown as uS/cm at 25 C. We may include a "TDS" cross reference value for those meters that have TDS scales but we want you to understand the limitations of this terminology. Some of our standards cross-reference TDS values for ppm NaCl and also TDS from the "442" natural water curve which are more likely to fit readings used in water testing, hydrop...

  • Brand: Biopharm
  • ASIN: B01M2DBGTS
  • UPC: 721272377262
  • Part No: BC8218PX
Conductivity Calibration Solution - Conductivity 2-Point Calibration Standard 2-Pack 8oz Each 100 uS and 1413 uS
Conductivity 2-Point Calibration Standard 2-Pack 8oz Each 100 uS and 1413 uS

Don't assume that your conductivity meter is working correctly. Probes can get dirty, worn and damaged. Give yourself that feeling of confidence that comes from doing things the right way. We suggest you use 2 calibration standards to cover a range that you normally work within to verify the linearity of the instrument. A different correction factor may be required for high EC values compared to low EC values. If your meter is essentially linear over the entire calibration range you can feel confident in your measurement results. TDS is an old terminology still used today in some water testing applications. It attempts to correlate Total Dissolved Solids (TDS) with conductivity. But because the conductivity depends upon exactly which "solids" are dissolved it can vary widely with different situations. Biopharm conductivity standards are calibrated using NIST traceable potassium chloride conductivity reference standards and are shown as uS/cm at 25 C. We may include a "TDS" cross reference value for those meters that have TDS scales but we want you to understand the limitations of this terminology. Some of our standards cross-reference TDS values for ppm NaCl and also TDS from the "442" natural water curve which are more likely to fit readings used in water testing, hydroponic and...

  • Brand: Biopharm
  • ASIN: B01F2OZY4U
  • UPC: 721272377125
  • Part No: BC8214X
Calibration Conductivity Solution - Atlas Scientific K 1.0 Conductivity Calibration Solutions - 12,880µS & 80,000µS - 125ml (4oz) Pack of 2
Atlas Scientific K 1.0 Conductivity Calibration Solutions - 12,880µS & 80,000µS - 125ml (4oz) Pack of 2

Conductivity Calibration solution K 1.0 contains 2 4oz 125ml bottles, one (12,880µS) and one (80,000µS) used to calibrate the Atlas Scientific conductivity probe K 1.0.

  • Brand: Atlas Scientific
  • ASIN: B00P9KK3T4
  • UPC: 857434005046
  • Part No: chem-EC-1.0
Calibration Conductivity Solution - Hanna Instruments HI7031L 1413 µs/cm Conductivity Calibration Solution, 500mL Bottle
Hanna Instruments HI7031L 1413 µs/cm Conductivity Calibration Solution, 500mL Bottle

Proper calibration of the instrument to sensor measuring system will ensure your results are accurate and repeatable. The use of standard calibration solutions is fundamental for correctly calibrating the measuring system. The Hanna range of conductivity calibration solutions has been produced to ensure the maximum accuracy for conductivity meters and probes. Guaranteed quality. Hanna conductivity meters can be calibrated in a few minutes right in the laboratory or field. For those users that require documented accuracy, conductivity (EC) solutions are available in bottles with certificates of analysis. Hanna solutions are offered in opaque, light-tight bottles that meet requirements. 1413 microsiemens/cm EC value at 25 degree C. 500mL size.

  • Brand: Hanna Instruments
  • ASIN: B0085XQTWM
  • UPC: 611517433153
  • Part No: HI7031L
Calibration Solution Conductivity - Conductivity 2-Point Calibration Standard 2-Pack 8oz Each 100 uS and 3000 uS
Conductivity 2-Point Calibration Standard 2-Pack 8oz Each 100 uS and 3000 uS

Don't assume that your conductivity meter is working correctly. Probes can get dirty, worn and damaged. Give yourself that feeling of confidence that comes from doing things the right way. Get our independent, unbiased and scientifically documented calibration standards and test it yourself. Instructions and usage suggestions included. We suggest you use 2 calibration standards to cover a range that you normally work within to verify the linearity of the instrument. A different correction factor may be required for high EC values compared to low EC values. If your meter is essentially linear over the entire calibration range you can feel confident in your measurement results. TDS is an old terminology still used today in some water testing applications. It attempts to correlate Total Dissolved Solids (TDS) with conductivity. But because the conductivity depends upon exactly which "solids" are dissolved it can vary widely with different situations. Biopharm conductivity standards are calibrated using NIST traceable potassium chloride conductivity reference standards and are shown as uS/cm at 25 C. We may include a "TDS" cross reference value for those meters that have TDS scales but we want you to understand the limitations of this terminology. Some of our standards cross-referenc...

  • Brand: Biopharm
  • ASIN: B01F7L9QD8
  • UPC: 721272377149
  • Part No: BC8216X
Calibration Conductivity Solution - Bluelab 2.77EC Conductivity Solution, 250 milliliters
Bluelab 2.77EC Conductivity Solution, 250 milliliters

The EC2.77 solution is used as a reference or checking solution to ensure you have adequately cleaned the EC/ppm probe. Calibration Solutions should be stored in a cool place out of direct sun and heat. Please keep out of reach of children. They should be stored with the lids securely tightened.

  • Color: clear
  • Brand: Bluelab
  • ASIN: B00Z6SJ69C
  • UPC: 791090263047
  • Part No: 732899
Conductivity Calibration Solution - Apera Instruments AI1130 1413 µS/cm Conductivity Calibration Solution 8oz
Apera Instruments AI1130 1413 µS/cm Conductivity Calibration Solution 8oz

The Apera Instruments AI1121 1413 µS/cm Standard Conductivity Calibration Solution is standardized against NIST certified references at 25°C (77°F). It's ideal for the calibration of all kinds conductivity meters. Since conductivity value are affected by temperature, the temperature & conductivity reference charts are provided on the bottle labels for your reference. All the solutions are double-sealed, not subject to the DOT shipping restrictions, and have a 1-year shelf life. The expiration date is printed on the bottle. MSDS is downloadable at support.aperainst.com; Certificate of Analysis can be achieved by requests. Note: Store at room temperature and away from direct sunlight. Keep the bottle tightly closed when not in use. Keep out of reach of children.

  • Brand: Apera Instruments, LLC
  • ASIN: B07GYYMQCN
  • UPC: 858718006940
  • Part No: AI1130
Solution Calibration Conductivity - Conductivity Calibration Standard 3-Pack 500 ml Each 1000 US, 10,000 uS and 100,000 uS
Conductivity Calibration Standard 3-Pack 500 ml Each 1000 US, 10,000 uS and 100,000 uS

Don't assume that your conductivity meter is working correctly. Probes can get dirty, worn and damaged. Give yourself that feeling of confidence that comes from doing things the right way. We suggest you use 2 or more calibration standards to cover a range that you normally work within to verify the linearity of the instrument. A different correction factor may be required for high EC values compared to low EC values. If your meter is essentially linear over the entire calibration range you can feel confident in your measurement results. TDS is an old terminology still used today in some water testing applications. It attempts to correlate Total Dissolved Solids (TDS) with conductivity. But because the conductivity depends upon exactly which "solids" are dissolved it can vary widely with different situations. Biopharm conductivity standards are calibrated using NIST traceable potassium chloride conductivity reference standards and are shown as uS/cm at 25 C. We may include a "TDS" cross reference value for those meters that have TDS scales but we want you to understand the limitations of this terminology. Some of our standards cross-reference TDS values for ppm NaCl and also TDS from the "442" natural water curve which are more likely to fit readings used in water testing, hydrop...

  • Brand: Biopharm
  • ASIN: B01M2CVMSG
  • UPC: 721272377255
  • Part No: BC8219PX
 - pH 7.0 Calibration Solution 8 oz
pH 7.0 Calibration Solution 8 oz

Conductivity Calibration Solution

  • Model: GH1551
  • Color: 8 OunceOther
  • Size: 8 oz8 fl oz
  • Rating: 5.0
 - General Hydroponics Ph 4.01 & Ph 7.0 Calibration Solution Kit, 8 oz
General Hydroponics Ph 4.01 & Ph 7.0 Calibration Solution Kit, 8 oz

Conductivity Calibration Solution

  • Size: Pint
 - Apera Instruments 16oz. pH Calibration Buffer Solution Kit (pH 4.00, 7.00 & 10.01), plus 3M KCL Storage Solution and CalBox
Apera Instruments 16oz. pH Calibration Buffer Solution Kit (pH 4.00, 7.00 & 10.01), plus 3M KCL Storage Solution and CalBox

Conductivity Calibration Solution

 - C-342 Hm Digital Calibration Solution
C-342 Hm Digital Calibration Solution

Conductivity Calibration Solution

  • Model: HM-DIGITAL-C-342
  • Color: BlueTransparent/Blue
  • Size: 342ppm, 90 ml Capacity
 - pH 4.01 Calibration Solution 8 oz
pH 4.01 Calibration Solution 8 oz

Conductivity Calibration Solution

  • Model: GH1541
  • Color: White
  • Size: 8 oz
 - Hydrofarm HMDC1000 1000ppm Calibration Solution
Hydrofarm HMDC1000 1000ppm Calibration Solution

Conductivity Calibration Solution

  • Model: HMDC1000
  • Color: WhiteBlue
  • Size: 1000ppm, 88.7ml Capacity88.7
 - general hydroponics ph 4.01 & ph 7.0 calibration solution kit, 1 quart
general hydroponics ph 4.01 & ph 7.0 calibration solution kit, 1 quart

Conductivity Calibration Solution

  • Color: White
 - Biopharm Buffer Calibration Solution Kit 3-Pack of 250 ml (8oz) each pH 4, 7 and 10 Calibration Standards Color coded NIST Traceable For All pH meters
Biopharm Buffer Calibration Solution Kit 3-Pack of 250 ml (8oz) each pH 4, 7 and 10 Calibration Standards Color coded NIST Traceable For All pH meters

Conductivity Calibration Solution

  • Size: 250 mL

Measurement of Conductivity

Conductivity Calibration Solution

Tags:

Conductivity Calibration Solution U4643 Search Results

Want more Conductivity Calibration Solution similar ideas? Try to explore these searches: Rta Maple Cabinets, Mexican Decaffeinated Coffee, and Blue Max Garage Door Opener.

AllinShopy.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.