Compare Prices

Red Head Wedge Concrete Anchor

Anchor Concrete Red Wedge Head - Simpson Strong Tie WA37334 3/8-Inch by 3-3/4-Inch Zinc Plated Steel Wedge-All Anchor with 2-5/8-Inch Thread Length, 50-Pack
Simpson Strong Tie WA37334 3/8-Inch by 3-3/4-Inch Zinc Plated Steel Wedge-All Anchor with 2-5/8-Inch Thread Length, 50-Pack

The Wedge-All wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled concrete masonry. A one-piece clip ensures uniform holding capacity that increases as tension is applied.

  • Brand: Simpson Strong-Tie
  • ASIN: B009ENTI3Y
  • UPC: 044315753213
  • Part No: WA37334
Concrete Head Anchor Wedge Red - CONFAST 1/2
CONFAST 1/2" x 4-1/4" Wedge Anchor Zinc Plated (Box of 25)

ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 1/2".Length Anchor The length of the anchor is 4-1/4"Thread LengthThe length of the threads on the anchor is 2-3/4" in length.Minimum EmbedmentThe minimum anchor embedment into the concrete is 2-1/4". Therefore, the anchor must be installed so that a minimum of 2-1/4" of the anchor is embedded into the concrete.Maximum Fixture ThicknessThe maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-1/2". This will ensure that the minimum embedment of 2-1/4" will be met.Fixture Hole DiameterThe hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/2" diameter anchor requires the hole in the fixture to be 5/8".Torque ValueTo be set properly in the concrete, the anchor must be torqued to betw...

  • Brand: CONFAST
  • ASIN: B071ZDZ4Y7
  • Part No: WA12414
Head Wedge Anchor Concrete Red - CONFAST 1/2
CONFAST 1/2" x 5-1/2" Wedge Anchor Zinc Plated (Box of 25)

ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 1/2".Length Anchor The length of the anchor is 5-1/2"Thread LengthThe length of the threads on the anchor is 4" in length.Minimum EmbedmentThe minimum anchor embedment into the concrete is 2-1/4". Therefore, the anchor must be installed so that a minimum of 2-1/4" of the anchor is embedded into the concrete.Maximum Fixture ThicknessThe maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 2-3/4". This will ensure that the minimum embedment of 2-1/4" will be met.Fixture Hole DiameterThe hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/2" diameter anchor requires the hole in the fixture to be 5/8".Torque ValueTo be set properly in the concrete, the anchor must be torqued to between ...

  • Brand: CONFAST
  • ASIN: B0723988J3
  • Part No: WA12512
Wedge Red Anchor Concrete Head - ITW Ramset/Red Head 2014 50PC 3/8X3 Wedge Anchor
ITW Ramset/Red Head 2014 50PC 3/8X3 Wedge Anchor

Use in concrete where excellent holding power is required. Drill hole same diameter as anchor. Exact hole depth is not required.

  • Color: red
  • Brand: ITW Ramset Red Head
  • ASIN: B002WGJQHI
  • UPC: 735090577322
  • Part No: IRHWS3830
Head Red Wedge Concrete Anchor - Simpson Strong Tie Wa75512 3/4-Inch by 5-1/2-Inch with 3-5/8-Inch Thread Length Zinc Plated Steel Wedge-All Anchor, 10-Piece
Simpson Strong Tie Wa75512 3/4-Inch by 5-1/2-Inch with 3-5/8-Inch Thread Length Zinc Plated Steel Wedge-All Anchor, 10-Piece

The Wedge-All wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled concrete masonry. A one-piece clip ensures uniform holding capacity that increases as tension is applied.

  • Brand: Simpson Strong-Tie
  • ASIN: B009YO329O
  • UPC: 044315987311
  • Part No: WA75512
Anchor Red Concrete Wedge Head - Red Head HN-1240 Dynabolt Hex Nut 1/2-Inch by 4-Inch Sleeve Anchor (25 per Box)
Red Head HN-1240 Dynabolt Hex Nut 1/2-Inch by 4-Inch Sleeve Anchor (25 per Box)

ITW Red Head Sleeve Anchor, Type: Sleeve Anchor, Style: Hex head, Size: 1/2" x 4", Package Quantity: 25 per box

  • Brand: ITW RED HEAD
  • ASIN: B002WGJRY0
  • UPC: 662520021202
  • Part No: IRHHN1240
Concrete Wedge Red Head Anchor - CONFAST 3/4
CONFAST 3/4" x 5-1/2" Wedge Anchor Zinc Plated (Box of 20)

ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 3/4" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 3/4".Length Anchor The length of the anchor is 5-1/2"Thread LengthThe length of the threads on the anchor is 3-1/4" in length.Minimum EmbedmentThe minimum anchor embedment into the concrete is 3-1/4". Therefore, the anchor must be installed so that a minimum of 3-1/4" of the anchor is embedded into the concrete.Maximum Fixture ThicknessThe maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-1/2". This will ensure that the minimum embedment of 3-1/4" will be met.Fixture Hole DiameterThe hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/4" diameter anchor requires the hole in the fixture to be 1".Torque ValueTo be set properly in the concrete, the anchor must be torqued to betwee...

  • Brand: CONFAST
  • ASIN: B071SDDB2B
  • Part No: WA34512
Concrete Anchor Wedge Red Head - Red Head HN-1614 Dynabolt Hex Nut 5/16-Inch by 1-1/2-Inch Sleeve Anchor (100 per Box)
Red Head HN-1614 Dynabolt Hex Nut 5/16-Inch by 1-1/2-Inch Sleeve Anchor (100 per Box)

Dynabolt Sleeve Anchors feature an expandable sleeve over threaded bolt, with a nut and washer. They can be installed through the object being fastened. The 6-rib sleeve helps ensure holding power of expansion device. Use in masonry applications such as concrete, hollow or shallow masonry, or grout-filled blocks. This listing is for pkg. of 100. Technical Specification Item Sleeve Anchor Expansion Anchor Head Style Hex Nut Anchor Material Steel Fastener Finish Zinc Plated Anchor Dia. 5/16 Anchor Length 1-1/2 Thread Size 1/4-20 Max. Work Thickness 1/4 ICC Approved for Cracked Concrete No ICC Approved for Un-Cracked Concrete Yes Min. Embedment 1-1/4 Ultimate Shear in 4000 PSI Concrete (Lb.) 2400 Ultimate Tension in 4000 PSI Concrete (Lb.) 2600 Meets/Exceeds A-A-1923A Compliance and Restrictions This item has been restricted from sale in the following states: PR.

  • Brand: ITW RED HEAD
  • ASIN: B002WGJRWC
  • UPC: 662520021387
  • Part No: HN1614
 - Lot of 6, Red Head 1/2
Lot of 6, Red Head 1/2" x 7" Heavy Duty Concrete Wedge Anchor Bolts, 50098

Red Head Wedge Concrete Anchor

 - Lot of 10, Red Head 1/2
Lot of 10, Red Head 1/2" x 7" Heavy Duty Concrete Wedge Anchor Bolts, 50098

Red Head Wedge Concrete Anchor

 - 3/8
3/8"-16 x 3-3/4" Concrete Wedge Anchor - QTY 25

Red Head Wedge Concrete Anchor

  • Color: Silver
 - Lot of 4, Red Head 3/8
Lot of 4, Red Head 3/8" x 3" Concrete Wedge Anchors, 50092

Red Head Wedge Concrete Anchor

 - Lot of 9, Red Head 3/8
Lot of 9, Red Head 3/8" x 2-1/4" Concrete Wedge Anchors, 50091

Red Head Wedge Concrete Anchor

 - Red Head Wedge Anchor
Red Head Wedge Anchor

Red Head Wedge Concrete Anchor

  • Model: 11272
  • Color: Multicolor
  • Size: PK 25
 - 1/2
1/2"-13 x 12" Concrete Wedge Anchor - QTY 1

Red Head Wedge Concrete Anchor

  • Color: Silver
 - 1/4
1/4"-20 x 3-1/4" Concrete Wedge Anchor Grade 5 - QTY 25

Red Head Wedge Concrete Anchor

  • Color: Silver

Dewalt DW511 Hammer Drill and Redhead Wedge Anchor Bolts

Red Head Wedge Concrete Anchor

DeWalt DW511 1/2" variable speed hammer drill: Amazon.com: http://amzn.to/19A8Mfw Redhead Anchor Wedge Bolts: Amazon.com: http://amzn.to/17mJA7R This video demonstrates the DeWalt DW511 variable speed hammer drill and shows how to use Redhead 1/2" x 5 1/2" Wedge Anchor Bolts. Free 30 day tri...

Tags: DeWalt DW511,Redhead,Wedge Anchor Bolts,Hammer ...

Red Head Wedge Concrete Anchor E9403 Search Results

Want more Red Head Wedge Concrete Anchor similar ideas? Try to explore these searches: Blue Aquarium Lighting, Headworn Dynamic Mic, and Midwest Pet Exercise Pens.

AllinShopy.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.